Micron Silver, Pre-Mixed Silver Alloy Glass Ionomer Restorative

Micron Silver is a pre-mixed, radiopaque silver alloy Glass Ionomer Cement tailored for:

• Restoration of primary teeth
• Core build-up
• Restoration of class I and limited class II cavities
• Serving as a base and liner

Fortified with a spherical silver alloy, this product delivers:

• High compressive strength
• Excellent tooth adhesion
• Sustained fluoride release

Composition:

• Powder: Fluoro Alumino Silicate Glass Powder, Silver Alloy Spherical Powder.
• Liquid: Polyacrylic Acid Solution.

Indications:

1. Core build-up.
2. Restoration of primary teeth.
3. Applications needing radiopacity.
4. As a base or liner.
5. Class I, limited Class II (low stress-bearing areas), temporary fillings, and more.
6. Long-term temporary cusp replacements.
7. Intermediate restoratives and base material for class I and II cavities (sandwich technique).
8. Class V restorations (non-aesthetic situations).
9. Field restorative work using the ART technique.
10. Temporary endodontic fillings.

Usage Instructions:

As this is a pre-mixed cement, there's no need to add any alloy.

1. Dispensing Powder and Liquid:
   • 2 scoops of powder for every 2-3 drops of liquid.
   • Tap the powder bottle lightly; don't shake or invert.
   • Hold the liquid bottle vertically when dispensing.
   • Always close bottles after use.
   • Periodically shake the powder bottle.
2. Mixing:
   • Dispense materials on a mixing pad or glass slab.
   • Divide powder into two, then mix the first half with the liquid for 15-20 seconds. Mix the rest thoroughly for another 20 seconds. Aim for a heavy consistency.
3. Restorative Procedure:
   • Prepare the tooth as standard. For pulp capping, utilize Apacal Art/Cal LC.
   • Clean and slightly dry the tooth; don't over-dry. Micron Dentin Conditioner is advised for smear layer removal.
   • Mix the required cement amount. Note: 1min 30s working time at 23°C. Warmer temperatures reduce working time.
   • Wipe off surface moisture but avoid desiccation.
   • Apply the cement using an appropriate instrument, ensuring no air bubbles.
   • Shape the filling.
   • Set time: 5'00" to 5'30" post-mixing.

Contraindications:

1. Not suitable for pulp capping.
2. Might cause sensitivity in rare instances. If so, stop its usage and consult a physician.

Warnings:

• Prevent prolonged or repeated exposure to skin and eyes.
• Do not inhale extensively.
• Do not consume.
• If in contact with skin, cleanse with cotton & alcohol, then soap & water. For allergic reactions, discontinue use and seek medical help.
• In case of eye exposure, flush with water and consult a doctor.
• Not recommended for those with severe allergies to its ingredients.

Storage:

• Store between 10°C to 24°C.
• Ensure the cap is tightly sealed after use.
• Store in a cool, dry place, away from moisture.

Shelf Life: 3 years from manufacturing.

Product Presentation:

• Ref: 30009
• Contents: 15g Powder, 10ml Liquid, Mixing Pad, Plastic Spoon.