- Type: Micro-Hybrid
- Tooth: Anterior + Posterior
- Class: Flowable
- Shade: A1
- Packing: Syringe 2g + 5x Tips
Delivery Before 24/05/2024 Fri
Alpha-Flow® is a radiopaque, light-cured, micro-hybrid flowable composite. Its organic matrix consists of Bis-GMA resin, incorporating a 38% by volume inorganic filler blend with particle sizes ranging from 0.02 - 0.7 microns. This unique composition ensures exceptional versatility, making it apt for an array of dental procedures. It now comes with added fluorescence to mimic natural tooth substance.
Key Features:
- Wide-ranging procedures: Suited for Class III and V cavities and small Class I and II restorations.
- Exceptional particle size range: 0.02 - 0.7 microns for desired consistency.
- Kit Varieties: Available in a Standard Kit (shades A2, A3, B2, and Universal Opaquer) or Custom Kit (in popular Vita®* shades).
Indications for Use:
- Small Class I and II restorations (non-occlusal surface)
- Class III and V restorations
- Undercut block-outs
- Tunnel prep filling
- Marginal defect repairs
- Composite and ceramic veneer repairs
- Temporary restorations re-conforming
Contraindication:
Patients with a history of severe allergic reactions to methacrylate resins should avoid using Alpha-Flow®.
Warnings:
- Etchant contains corrosive phosphoric acid; avoid contact with soft tissues, eyes, and skin.
- Not suitable for use with eugenol-based materials.
- Applicator tips are disposable and for single-patient use only.
General Precautions:
- Restricted to sale/order by a dentist.
- Familiarize with instructions and SDS (www.dentaltech.com/resource) before use.
Adverse Reaction:
Potential aggravation of allergic, skin, eye, or respiratory conditions upon exposure.
Usage Instructions:
- Tooth preparation, followed by isolation and thorough drying.
- Enamel etching with Alpha-Etch37® for 15 seconds or dentin etching for 10 seconds, with a maximum time of 60 seconds.
- Rinse well.
- Dry etched tooth for Alpha-Bond® Light Cure Bonding Resin. Apply one uniform layer, then light cure.
- Choose Alpha-Flow® shade and apply directly to the tooth in increments of up to 2 mm.
- Light-cure composite for a minimum of 40 seconds.
- Standard finishing and polishing.
Storage Instructions:
- Store at 2°C/36°F to 27°C/80°F; use at room temperature (23°C/73°F).
- Avoid intense light or elevated temperatures.
- Always replace syringe cap post-use.
Alpha-Flow® ensures high-quality dental restorations, prioritizing precision, versatility, and patient safety.